Almohadillas antivibración de caucho y corcho PneumaticPlus para aislamiento, 4 unidades, 4

The vibration isolation is impressive. Our GE ClearView 12000 btu air conditioner was shaking the house but putting these under the foot pads outside and between the sill and the AC really reduced the wall shaking / rattling. But the quality control is dismal. The cork in the middle of one of the pads arrived peeled apart, so I couldn't use that one, but I got away with just using a single one in the middle on the front. Three of them were 2 7/8" square [instead of 3in square.. close enough] but one was noticably undersized at 2 5/8" x 2 7/8". As long as you don't need all three and you don't need them to be the full size, these things do wonders with vibrations.

Got my grandpa's old air compressor and didn't want to drill into the garage floor at my new house. These actually do great at stopping vibration and the tank doesn't move.

f you're a vinyl collector, you know that foot traffic or speaker feedback can ruin a listening session. I used these 3" x 3" pads to isolate my turntable, and the difference is night and day. The cork-and-rubber sandwich construction absorbs low-frequency vibrations that standard feet just can't handle. It completely eliminated the "needle skip" I was getting when walking near the setup. It’s an industrial solution that works better than high-end audio isolators triple the price. If you want a dead-silent background for your records, start here.

Thank goodness for these things! I live above the boiler room of our condo, and they have giant blowers that circulate fresh air through the building night and day. These create a vibration that has come up through my bed, making it difficult to sleep. Placing one of these under each leg of my bed has damped the vibrations completely! I highly recommend them.

I put them under the legs of my Wahoo Kickr Bike indoor trainer. It was sitting on top of Wahoo mat, which can protects the floor from sweat and hardwood on the floor from scratches, but it does not sufficiently absorb the vibrations from the flywheel of the trainer. With these shock absorbers, a significant fraction of the vibrations disappeared. In my house, it is installed on the second floor. Both, the noise level in the "kickr room" and the noise transmitted through the flor to the room below, were significantly reduced.The pads have a strong rubber smell out of the package. I left them in the garage for 24 hours. They still retained some smell after that, but much less. They are also a little pricey for what they are. They also come with a California disclaimer that some of the …

If you've ever wrestled with the disruptive vibrations caused by speakers on your desk, you'll deeply appreciate the transformative power of PneumaticPlus Anti Vibration Rubber & Cork Isolation Pads. These unassuming pads play a pivotal role in crafting a harmonious workspace, effectively isolating your speakers from your desk and mitigating those unwanted disturbances.Here's what sets these pads apart:Pros:Effective Isolation: The primary mission of these pads is to isolate vibrations, and they do so with remarkable efficacy. Placing them beneath your speakers significantly curtails the transmission of vibrations to your desk, resulting in a cleaner and more enjoyable audio experience.Simplicity in Action: The brilliance of these isolation pads lies in their simplicity. Their setup is …

I bought these anti vibration pads to fit under the table my long arm quilting machine sits on. My quilting frame is a small one and sits on top of a wooden table that sits on wooden floors. Because my longarm weights about 40 lbs and goes at a pretty high rate of speed, there was a lot of vibration as my floors are wood and they give so much. This in turn created some issues with the stitch quality I was getting simply because the machine was bouncing so much!The difference was noticeable right away! Once I put them in place, my machine quit bouncing and moving around without my having to lock it in place. It also runs a lot quieter! (Go figure!)My stitch quality is excellent and I'm not worried about my machine bouncing off the frame!Because of some of the comments about the smell of …

Ok, to address the elephant is the room...yes, they have quite a pronounced rubber smell...initially. The smell goes away after sitting out of the packaging in about an hour. I appreciate that some people are very sensitive to smell, so I'd recommend sitting them out in the open/outdoors for a bit before installing/handling.Having said that, these pads act as great vibration isolators! I bought these to use for a new turntable I purchased (Denon's magnificent VL12 Prime!). I currently have these pads under a 1" Top Chop maple butch block that I use as the turntable's platform. The pads isolate the platform & turntable from my rack surface. To further isolate the turntable, I then sat it on top of four Vibrapods (Model 4). This has resulted in not only a rock-solid, ultra-damped foundation